amplified labs formerly empower peptides

Peptide Reconstitution Calculator

Amplified Labs · Research calculations

Peptide Reconstitution Calculator

Calculate concentration from the labelled peptide mass and the final solution volume, in mg/mL and mcg/mL. Optionally enter an aliquot mass in micrograms to see the matching volume in mL and microlitres. Choose a listed product option or enter custom values.

All Amplified Labs products are supplied for laboratory research only and are not for human or animal use. This calculator performs arithmetic on the values you enter and does not provide handling, preparation or use guidance.

Loading calculator… If the fields do not appear, reload this page with JavaScript enabled.

How to use the calculator

  1. Select a listed product option or choose custom entry, then confirm that the labelled mass in mg matches your vial label.
  2. Enter the final solution volume in mL from your laboratory records. Presets fill in the mass only, never the volume.
  3. Optionally, enter an aliquot mass in mcg to add an aliquot-volume result. Leave it blank to calculate concentration only.
  4. Calculate, then read the concentration in mg/mL and mcg/mL, plus any aliquot volume in mL and microlitres.

Enter values you already have: this tool converts one labelled mass and one final solution volume into a concentration, and it does not suggest a solvent, volume or amount.

How the calculation works

From labelled mass to concentrationIllustrative calculation using the final solution volume.
Labelled mass10 mg
÷
Final volume2 mL
=
Concentration5 mg/mL
  • Concentration (mg/mL) = labelled mass (mg) ÷ final solution volume (mL)
  • Concentration (mcg/mL) = concentration (mg/mL) × 1,000
  • Aliquot volume (mL) = aliquot mass (mcg) ÷ concentration (mcg/mL)
  • Aliquot volume (µL) = aliquot volume (mL) × 1,000

Units used on this page

Mass and volume are each converted only within their own unit family. 1 mg = 1,000 mcg, and mcg and µg are two symbols for the same unit, the microgram. 1 mL = 1,000 microlitres (µL). The product mass field uses mg and the aliquot field uses mcg, so check which field you are filling before you enter a value.

Reference: NIST SI prefixes

Worked examples

The table shows three illustrative calculations. They demonstrate the arithmetic only and are not recommended masses, volumes or preparation steps.

Concentration and aliquot-volume examples
Labelled massFinal volumeConcentrationVolume for 250 mcg
5 mg2 mL2.5 mg/mL0.1 mL / 100 µL
10 mg2 mL5 mg/mL0.05 mL / 50 µL
20 mg4 mL5 mg/mL0.05 mL / 50 µL

Example: 10 mg ÷ 2 mL = 5 mg/mL, or 5,000 mcg/mL. An entered aliquot mass of 250 mcg gives 250 ÷ 5,000 = 0.05 mL, or 50 microlitres.

What the result represents

Results use the nominal labelled mass you enter and assume it is evenly distributed throughout the final volume you enter. The calculator does not measure the solution, apply HPLC purity or net peptide content corrections, or confirm solubility, handling or compatibility. Purity and peptide content are different properties, and neither one is a measurement of this solution.

Reference: HPLC purity and peptide content

Explore single-compound listings

Choose the option whose strength matches your vial label. For example, BPC-157 is listed at 5, 10 and 20 mg, and GHK-Cu is listed at 50 and 100 mg. If no option matches, use custom entry. The selected listing then shows its product and documentation links.

More products (9)

Calculator questions

Is the final volume the same as the liquid I added?

Not necessarily. Enter the total volume of the finished solution in mL, as recorded. The calculator divides the labelled mass by that figure. If the liquid added differs from the final volume, entering it will produce a different calculated concentration.

How much BAC water should I add?

The calculator does not choose a solvent, diluent or volume. It works only with the final solution volume you enter, which should come from your laboratory protocol or records. A different entered volume simply produces a different calculated concentration.

What is an aliquot, and do I have to enter one?

An aliquot is a measured portion of the solution. The aliquot field is optional. Enter a mass in mcg to see the corresponding volume in mL and microlitres, or leave the field blank to calculate concentration only.

Why was an input rejected, or why did my result disappear?

Entries must be positive decimal numbers within the accepted range shown in an error message. The aliquot mass cannot exceed the total labelled mass. Editing an input clears the previous result until you calculate again.

What if the preset doesn’t match my vial?

A preset fills in only the labelled mass for a listed option. It does not set the volume. If the mass on your label differs from the selected option, or your product is not listed, choose custom entry and enter the mass shown on your label in mg.

Does a certificate of analysis cover my vial?

Compare the lot number on your vial label with the document. A certificate applies only to the lots it identifies. Some listings link to a general COA library. Contact us if you cannot find documentation for a matching lot.

Can I use this for a blend, molarity or a serial dilution?

Not for those tasks. For several components in one shared final volume, use the peptide blend calculator. This page does not calculate molarity, stock-to-working dilutions or amounts to use. It divides one labelled mass by one final volume.

Already know your stock concentration? Use the Serial Dilution Calculator to plan an equal-factor dilution series or a single working dilution.

Make a label for your research record

Once you have a valid result, select Create a vial label to open the Peptide Label Maker with your values ready to check and edit.

Open the free Peptide Label Maker

Peptide COA Finder

Find an available original report by product or full lot, then compare the document details with your label.

Peptide COA Finder

Black Friday + Cyber Monday35% offOn eligible regular-price products

BLACK35
Coupon has expired

Shop the sale

Ends Nov. 30 at 11:59 p.m. Eastern

No minimum purchase. One use per customer. Cannot be combined with other codes, discounts or special pricing.

View full terms

Save 35% Now
Scroll to Top
Amplified Labs

Access to certain Amplified Labs content and features may require account registration.

Login/Create an account to access additional site features, content and detailed information.