Research Peptide Blends
Shop five research peptide blends from Amplified Labs across six vial options. Filter by ingredient or scan the comparison table, then open a listing to choose a size and check current price and stock.
For laboratory research use only. Not for human or veterinary use.Shop research peptide blends
5 blends · 6 vial options
KLOW Blend
80 mg per vial
TB-500 10 mg, BPC-157 10 mg, GHK-Cu 50 mg, KPV 10 mg
Tesamorelin + Ipamorelin
13 mg per vial
Tesamorelin 10 mg, Ipamorelin 3 mg
CJC-1295 No DAC + Ipamorelin
10 mg per vial
CJC-1295 No DAC 5 mg, Ipamorelin 5 mg
Compare ingredients and vial sizes
Wolverine Stack vs GLOW vs KLOW
Wolverine Stack lists BPC-157 and TB-500 only. GLOW 70 mg adds GHK-Cu 50 mg to 10 mg each of BPC-157 and TB-500. KLOW 80 mg lists the same three components plus KPV 10 mg.
The 10 mg Wolverine vial lists 5 mg each of BPC-157 and TB-500. The 20 mg vial lists 10 mg of each, matching the labeled amounts of those two ingredients in GLOW and KLOW.
Each row shows one vial option. Compare the amount of each ingredient with the total labeled mass per vial.
Scroll the table to see price, availability, and batch reports.
| Blend | Labeled ingredients | Total per vial | Price and stock | Documentation |
|---|---|---|---|---|
| GLOW Blend |
| 70 mg | Batch reports | |
| KLOW Blend |
| 80 mg | Batch reports | |
| Wolverine Stack |
| 10 mg | Batch reports | |
| Wolverine Stack |
| 20 mg | Batch reports | |
| Tesamorelin + Ipamorelin |
| 13 mg | Batch reports | |
| CJC-1295 No DAC + Ipamorelin |
| 10 mg | Batch reports |
- TB-500 5 mg
- BPC-157 5 mg
- TB-500 10 mg
- BPC-157 10 mg
Guide to blend labels and batch reports
What is a peptide blend?
A peptide blend is one precombined vial that holds two or more listed peptides. An individual peptide vial holds a single compound. Our blends combine seven ingredients across the catalog, including BPC-157, TB-500, GHK-Cu, KPV, Tesamorelin, Ipamorelin and CJC-1295 No DAC.
Narrow the list with the ingredient filter
Choose an ingredient in the filter to narrow the list to blends that include it. Ipamorelin, for example, appears in two blends with different partners. KPV appears only in KLOW. After filtering, use the comparison table to check each labeled ingredient and the total per vial side by side.
GLOW and KLOW
GLOW Blend lists TB-500 10 mg, BPC-157 10 mg and GHK-Cu 50 mg, for a 70 mg total. KLOW Blend lists the same three amounts and adds KPV 10 mg, for an 80 mg total. The 10 mg gap between the totals equals the added KPV. The GLOW vs KLOW comparison covers both blends in more detail.
Wolverine Stack in two sizes
The Wolverine Stack is one listing with two size options. The 10 mg option lists TB-500 5 mg and BPC-157 5 mg. The 20 mg option lists 10 mg of each. Both keep a 1:1 labeled mass ratio, which means equal milligrams of each ingredient. The larger size doubles each amount while the proportion stays the same. Select the size on the listing before adding it to the cart.
Two blends that contain Ipamorelin
Tesamorelin + Ipamorelin lists Tesamorelin 10 mg and Ipamorelin 3 mg, for a 13 mg total. CJC-1295 No DAC + Ipamorelin lists 5 mg of each, for a 10 mg total. Both the partner peptide and the labeled mass differ, so check the name paired with Ipamorelin on each card.
The Blend Calculator page includes a reference composition table for common blends.
How to read a blend label
Each listing gives the component list and the total labeled mass per vial. The vial photo shows the product name and labeled total, and some photos also show a batch field. Check these fields in order to confirm the exact option.
- Product name
- The name used to identify the blend, such as GLOW or Wolverine Stack.
- Ingredient amount
- The labeled milligrams (mg) of one listed peptide in the vial.
- Total labeled mass
- The sum of all listed ingredient amounts in one vial.
- Labeled mass ratio
- How the ingredient amounts compare with each other. Equal amounts form a 1:1 ratio.
- Lot or batch number
- The production batch code, where one is printed. It is used to match a vial to its report.
Worked example with 5 mg + 5 mg
- Open the CJC-1295 No DAC + Ipamorelin listing.
- Read the components, which list CJC-1295 No DAC 5 mg and Ipamorelin 5 mg.
- Add the amounts. 5 mg + 5 mg equals 10 mg, which matches the 10 mg total on the vial photo.
- Compare the amounts. Equal milligrams give a 1:1 labeled mass ratio.
The same check works across the catalog. The Tesamorelin + Ipamorelin total of 13 mg is 10 mg + 3 mg. The KLOW total of 80 mg is 10 + 10 + 50 + 10 mg. If a total differs from the one you expect, confirm the selected size before checkout.
Same name, different composition
Blend names circulate widely, and vials from other sources can share a name while listing different amounts. The exact listing, vial size and ingredient amounts identify the formulation. Compare any option with its row in the comparison table.
Batch reports for peptide blends
A Certificate of Analysis (COA) records results for one tested sample from the issuing laboratory. A blend listing gives labeled amounts. A report gives measured results for its own sample. Report lookup is optional reference information and stays separate from choosing a product or checking out.
Find the matching report
After choosing an option, use the COA link beside it to open the COA Finder for that product. Then look for a report whose complete lot number matches the lot printed on your vial, where one appears. Compare the full code, since similar codes can belong to different batches. The original report file can be an image or a PDF. The COA Finder and reading guide explains each field.
Identifiers and results are different fields
Some fields identify the record. Others report what the laboratory measured. Field names vary by lab, and some fields are optional. These fields identify the record.
- Product name and nominal label amount, meaning the stated amount on the product listing
- Lot number for the tested batch
- Report or accession number, the laboratory's ID for that record
- Laboratory name and report date
These fields report measured results.
- Identity result
- Whether the stated test method found the expected compound in the sample.
- Purity
- A percentage tied to one stated test method. It describes what that method measured in that sample.
- Net peptide content
- The measured peptide content of the sample, reported as its own entry separate from purity.
Archived report example
The archive includes a historical report for a BPC-157 + TB-500 sample listed at 5 mg / 5 mg, the same labeled amounts as the 10 mg Wolverine option. It lists lot EMP-TB+BPC-250528-A10, report 2506160014 and a report date of June 19, 2025, from Freedom Diagnostics, with the original PDF. This report describes that past sample only. Use it to practice reading the fields, then match your own vial by its complete lot.
Frequently asked questions
Does 5 mg + 5 mg on the label mean 10 mg total?
Yes. The total labeled mass is the sum of the listed ingredient amounts. The 10 mg Wolverine Stack option lists TB-500 5 mg and BPC-157 5 mg for a 10 mg vial.
Is Wolverine one combined vial or two separate products?
It is one precombined vial. The Wolverine Stack is a single listing with TB-500 and BPC-157 together in each vial. Choose the 10 mg or 20 mg size on that listing.
What is the label difference between GLOW and KLOW?
Both list TB-500 10 mg, BPC-157 10 mg and GHK-Cu 50 mg, and KLOW adds KPV 10 mg for an 80 mg total, compared with 70 mg for GLOW. The ingredient filter shows KLOW when you select KPV.
Can a blend name appear on different vial compositions?
Yes. Vials from different sources can share a name and list different amounts. Every Amplified Labs blend option has its own row in the comparison table, so check that row to confirm the formulation.
How can I match a vial to its batch report?
Start with the exact product and size. Then compare the complete lot number printed on your vial, where one appears, with the lot on the report. The COA Finder lets you filter reports by product.
What does one purity result tell me about a blend?
It describes what the stated test method measured in that sample. Use the separate identity and net peptide content entries for the reported identity and measured amount. Check which compound or sample each result describes.